Smart Power Systems SSP UPS - Manual (Page 5)

2
2. SAFETY INSTRUCTION CAUTION
WARNING: Do not attempt to repair and service this UPS. This UPS
contains high voltages that may cause the risk of electrical shock.
Even if this UPS is disconnected from the electrical outlet, the
dangerous voltage still may be present through the battery. All
maintenance and battery replacement should be performed by
qualified service personnel only.
1. This UPS should be placed indoors with adequate airflow and free of
contamination. To install or operate it in a clean and indoor
environment, free from moisture, flammable liquids, and direct sunlight.
Ambient temperature range must be 0°C to 40°C (32°F to 104°F).
2. This UPS is designed for Commercial/Industrial use only. It is not
intended for use with life support application and other designated “life-
critical” devices.
3. Do not remove the input power cord when this UPS is turned on. This
removes the safety ground from this UPS and the equipment connected
to the UPS.
4. Turn off this UPS and disconnect input power cord before replacing
battery.
5. Battery contains high short-circuit current. Replacing or servicing the
battery should be performed and supervised by qualified service
personnel knowledgeable of batteries and required precautions.
Remove watches and jewelry
Use tools with insulated handles
6. When replacing the batteries, use the appropriate replacement battery kits,
same number and type of battery are a MUST.
7. Do not open or mutilate the battery. Released electrolyte is harmful to skin
and eyes that may be toxic.
8. Do not dispose of battery in a fire. Battery may explode. Proper disposal of
battery is required. Please refer to your local laws and regulations for
disposal requirements.
n
n