Vertical Communications 8012S - Manual (Page 100)

Other Advanced Features
90 Comdial October, 02
4. If your installer has enabled answer supervision on your line,
the system automatically cancels automatic redialing and
turns the AUTOMATIC REDIAL light off.
5. If answer supervision is NOT enabled, select Auto Redial or
the programmed AUTOMATIC REDIAL button while on the
call to cancel automatic redialing,
6. If your system installer has enabled the redial multiple num-
bers feature, you can have up to ten numbers in your redial
queue. To add numbers to your redial queue, REPEAT step 1
in the above procedure.
• To scroll through numbers in your redial queue if your
telephone is currently idle,
1. Select Auto Redial or the programmed AUTOMATIC
REDIAL button. The display shows the last number dialed.
2. Choose one of the following:
• Select REMOVE to remove the number from the redial
queue.
• Select NEXT to scroll to the next number in the queue.
• Select EXIT to exit from the redial queue.
• To interrupt the redialing procedure so that you can scroll
through numbers in your redial queue,
1. While your telephone is in the process of dialing a number,
Select Auto Redial or the programmed AUTOMATIC
REDIAL button twice. This treats the number as answered,
cancels automatic redialing for that number, and puts the
number back in the automatic redial queue. The display
shows the last number dialed.
2. Choose from one of the following:
• Select REMOVE to remove the number from the redial
queue.
• Select NEXT to scroll to the next number in the queue.
• Select EXIT to exit from the redial queue.