Vertical Communications 8012S - Manual (Page 63)

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 53
4.4 Call Parking
4.4.1 PARKING A CALL
You can place an intercom or outside call on hold in the system so
that it can be answered from any station, even though it may not
have a line appearance for the call. You accomplish this by plac-
ing the call in one of many park orbits, where the call remains
until it is answered.
• To park a call in orbit,
1. While on an outside call, press INTERCOM and dial * or
press TRNS/CONF if intercom call.
2. Dial the code for park orbit (910-999 for orbit 10-99).
3. Remember the code for later use or make it known to those
who need to know it in order to retrieve the call.
• To park a call using a programmed PARK button,
—While on the call, press the programmed Park button (the
system places the call in a preselected park orbit and lights
the PARK light).
• To retrieve a call that was placed on hold in the system
(parked)
1. Press INTERCOM.
2. Dial #
3. Dial the code for the orbit (910-999 for orbit 10-99), or press
the programmed PARK button.
4.4.2 HANDLING PARK RECALLS
When a parked call times out of the system, it returns to your tele-
phone in the form of a park recall (you hear four short tone bursts
at 12 second intervals).