Vertical Communications 8012S - Manual (Page 90)

Programming
80 Comdial October, 02
8. Select the feature you want to assign to by selecting the cor-
responding interactive button. (Select NEXT to scroll
through the list of available feature.
9. Repeat steps 1 through 7 for other features.
10. Select EXIT to end programming.
• To clear a feature button assignment,
—Repeat the above procedure, but select CLEAR before
selecting storage location button.
6.5 Reminder Alert
You can set up to two reminder alerts to sound so that you will
remember important regular events or occasional events.
• To set a reminder alert at your telephone,
1. Select OPTIONS.
2. Select Programming.
Figure 6-7 Setting an Alert
3. Select NEXT until the Reminder Alert option appears.
Reminder Alert 1 OFF
Reminder Alert 2 OFF
EXIT PREV