Vertical Communications 8012S - Manual (Page 43)

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 33
3.2 Making Intercom Calls
There are two methods for making an intercom call. One causes the
called telephone to ring (tone-first). The other causes your voice to
sound out at the called telephone (voice-first). Your installer can set
the system to deliver either tone-first or voice-first calling.
• To manually cause the other telephone to ring (tone calling),
1. Press INTERCOM or select Dial by Name.
2. Dial the extension number (called telephone will ring).
Figure 3-2 Intercom Call Screen
• To tone call automatically,
—Press DSS/BLF button (called telephone will ring).
Note: The following instructions assume a tone-first setting.
You can change a call to voice announce signaling for that call
simply by pressing the INTERCOM button again after dialing
the extension number or by pressing the DSS/BLF button
again.