Vertical Communications 8012S - Manual (Page 138)

128 Comdial October, 02
System Speed Dial
System speed dialing provides system users with a repertory of
up to 500 numbers that they can dial from any telephone in the
system. The installer or the attendant is responsible for storing
the system speed dial numbers.
T
TAP (Flash/Recall)
Depending on your system’s programming, this button gives you
a fresh dial tone or activates a hookflash.
Toll Restriction
Class of service feature by which the system allows or denies out-
going calls to selected users over selected lines.
Tone Call
A ringing intercom call.
TRNS/CONF
A fixed feature button that allows you to transfer outside calls and
set up conference calls.
U
Unscreened Call Transfer
Allows users to transfer line or intercom calls from one station or
group to another without first announcing them.
Unsupervised Conference
After establishing a conference between two outside parties, the
originator drops out leaving a line to line unsupervised connec-
tion with the remaining parties.
V
Voice call
A verbal intercom call.