Vertical Communications 8012S - Manual (Page 70)

Nonverbal Messaging
60 Comdial October, 02
5. Select the message you would like to appear in a calling
party’s LCD by selecting the corresponding interactive but-
ton. In addition to the five options shown below, there are 25
more options available to be programmed. Refer to the Dial-
ing Code Table on the next page.
• Select Back at and enter the time you will be back to
display “Back at xxxx” on the LCD display.
For example: dial #00 01 29 0405 for the time 01:45).
• Select Call to and enter the extension number to call to
display “Call and the extension number” on the LCD
display.
For example: DIAL #0907081502020000 for the number
978-2200.
• Select Out to lunch to display “Out to lunch” on the
LCD display.
• Select Take a message to display “Take a message” on
the LCD display.
• Select I will be back to display “I will be back” on the
LCD display.
6. Select EXIT.