Vertical Communications 8012S - Manual (Page 84)

Programming
74 Comdial October, 02
5. Select the programmable button at which you wish to store
the feature (remember, if there is anything else programmed
at this button, the new programming will overwrite it). For
help in selecting a button, select SHOW EMPTY LOCA-
TIONS to display unused feature buttons (green lights). To
display all feature buttons (used and unused) (red lights),
select SHOW ALL LOCATIONS.
6. The speakerphone will now display a list of features which
you can scroll through by selecting NEXT.
7. Select the feature you want to assign to the programmable
button.
8. Repeat the previous steps until all numbers are stored.
9. Select EXIT.
10. Press SPEAKER to end.
• To clear a feature button assignment,
—Repeat the above procedure, but select EXIT once you have
selected the feature button.
As you program numbers, fill in the identification strips on your tele-
phone as well as these tables.
Account Code
Auto Redial
Call Forward Entry
Call Forward Personal
EXIT PREV NEXT