Set modifiers – Welch Allyn Connex Integrated Wall System - User Manual User Manual
Page 64
Advertising
Set modifiers
1. Touch the Patients tab.
2. Touch the Modifiers tab.
3. Adjust the NIBP, O2, and Temperature settings as required.
4. Touch OK to accept the changes and return to the home screen, or touch Clear to delete all
entries.
The Modifier settings clear after a power cycle, after you clear the Home tab, or after you
select a new patient.
58 Patient data management
Welch Allyn Connex
®
Integrated Wall System
Advertising