Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual User Manual
Page 64
Advertising
5. In the Location pane, select an available room and bed from the list box.
Note
The Location list only presents locations that are not already
assigned to a continuous monitoring device.
"No location assigned" appears in the list box until you select a room and bed.
6. Touch OK to return to the Home tab.
The information is saved.
Note
You have the option to leave some fields blank on the Patient > Summary
tab. However, if patient name or location information is missing, the
monitor will prompt you to "Assign patient" or "Assign location" until that
information is complete. You can monitor the patient without entering all of
these details.
58 Connex CS
Welch Allyn Connex
®
Vital Signs Monitor 6000 Series™
Advertising