Welch Allyn AcuityLink Clinician Notifier - User Manual - Manual (Page 21)

Directions for Use Get started 17
To Assign patients to yourself
1. Verify that the unit listed at the top of the page is the unit in which you are currently
working.
If the device is assigned to another unit, contact your system administrator.
2. Assign patients:
a. Check boxes next to patients for whom you want to receive primary (first) alarm
notification.
b. To receive alarms for all other patients with unsuspended alarms, check the box
next to Receive Secondary Notification.
If you do not check this box, you still receive final broadcast alarms. Final
broadcast alarms are escalated to all clinicians if secondary notification alarms are
not suspended.
3. Tap Save.
Your selections are registered, and your patients sort to the top of the list.
4. Tap Done.
You navigate to the previous page or the Home page, depending upon how you
arrived at the Assign Patients page.
Clears all boxes.
Cancels all changes that have not been saved, and
restores original checks.