Welch Allyn AcuityLink Clinician Notifier - User Manual User Manual
Page 50
Advertising
46
Respond to alarms and alerts
Welch Allyn AcuityLink Clinician Notifier
Acuity Disconnected Alert
The Acuity Disconnected popup window occurs if the Welch Allyn Connectivity Server
(WACS) is not communicating with the Acuity System server.
The popup window is always associated with a “chirp” tone. The chirp repeats every 20
seconds.
To respond to an Acuity Disconnected alert
1.
Tap OK.
2.
Contact your system administrator.
The tone remains until the communication problem is resolved.
3.
If the Log In page appears, re-log in using the same user name and password that you
used before the disconnection.
Your patients remain assigned if you have been logged out for less than two hours.
Advertising