Overview, Adit 3000 connections, Overview -2 – Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI User Manual
Page 112: Adit 3000 connections -2
3-2
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Network Connections
Overview
Overview
The Network Connection window allows the user to create and configure network connections. For the
Adit 3000, the basic connections for the system are preconfigured. For the Adit MSR, only the Ethernet
connections are preconfigured. Additional connections can be set up with the New Connection option.
Adit 3000 Connections
When the Adit 3000 boots up, it detects the number of T1s on the configured system and creates the
appropriate T1, Ethernet, and Serial connections.
3104
3200
3500
Types
Configuration
Existing (default) Connections
X
X
X
T1 1
WAN T1
X
T1 2
WAN T1. T1 2 is used as the trunk and is configured
for PRI-Ni2 signaling/switching.
X
T1 3
WAN T1
X
T1 4
WAN T1
X
X
X
Ethernet 1
LAN Ethernet.
X
X
X
Ethernet 2
WAN Ethernet (disabled).
X
X
X
Serial 1 (PPPoT1)
WAN PPPoT1 (disconnected)
New Connections
X
X
X
Multilink
Multilink Point-to-Point Protocol over DS0. Connect
to the Internet using a MLPPP tunnel over HDLC.
X
X
X
Serial 1 (PPPoT1)
Point-to-Point Protocol over DS0. Connect to the
Internet using a PPP tunnel over HDLC.