Ospf configuration on the network connection, Ospf configuration on the network connection -40 – Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI User Manual
Page 150
Advertising
3-40
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Network Connections
OSPF Configuration on the Network Connection
OSPF Configuration on the Network Connection
OSPF can be set as the routing protocol on the following network connections:
Ethernet 1
Ethernet 2
Serial
Multilink
NOTE:
The following example uses the Ethernet 1 network connection. Configuration is the
same for the Ethernet 2, Serial 1, and Multilink connections.
To configure OSPF on a network connection:
1. Select Network Connections, and select the Ethernet 1 connection name to open the Ethernet
1 Properties window.
2. Select the Settings button.
Advertising