Connections that require configuration, Connections that require configuration -16 – Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI User Manual
Page 126
Advertising
3-16
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Network Connections
Connections that Require Configuration
Connections that Require Configuration
The following connection types must be configured using the New Connection selection.
NOTE:
For the Adit 3000, you must first deleted the pre-configured Serial 1 connection
before adding either of these connection types. (For the MSR, there is no pre-configured
Serial 1 connection.
)
Advertising