Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI - Manual (Page 161)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-7
Security
Access Control
Adding an Access Control Rule
To add an access control rule:
1. Select New Entry on the Security/Access Control window to display the Add Access Control
Rule window. At this window, you will define what interface to apply the rule to, the time
parameters, and the services to be blocked.
2. Select a Network Object from the Applied To pulldown menu (located at the top of the
window), or select New to define a new Network Object that will be displayed in the pulldown
menu. (See Network Objects on page 2-34 for more information.) Note: The pulldown menu
is only available when more than one Network Object has been created.
3. Scheduled Availability - To set this to a setting other that Always, select New and specify the
schedule on the Schedule Rule Edit window. For information on configuring the schedule, see
Scheduler Rules on page 2-52.
..
.