B&C Technologies SI Series Industrial User Manual
Page 13
the lifters are perforated on the top so that water can cascade over the goods and wet them quickly.
This reduces water consumption as water is picked up at the cylinders lowest point and lifted and
splashed over the goods at the highest point as the cylinder rotates.
A stainless steel door is provided for loading and unloading. A door lock system prevents oper-
ation of the machine when the door is open. The door is locked during operation utilizing an air
cylinder and a manual latch for safety reasons. The door lock is provided with magnetic sensor to
indicate that the machine is locked and provide for start of the machine when the door is closed
and locked.
The AC drive, brake unit, contactor, circuit overload protectors, input power supply connections,
external supply connections, and control transformer are behind a cover of the rear of the machine.
Pneumatic controls together with the air pressure regulator for the door seal are also located here.
9