B&C Technologies SI Series Industrial - Manual (Page 45)

OPEN DOOR
Indicates the door is not closed properly. This fault disables the machine until cleared, and aborts
a program if active. Press RESET to clear the fault.
LEVEL=cm4
Indicates a water level of greater than 2cm a the onset of spin or at cycle end. The machine will
resume the spin or unlock the door when the level falls below the threshold. Press RESET to abort
the cycle. Can also indicate a problem with the EL6 water level system. See the EL6 manual for
additional remedies.
6.4.15 Maintenance Alarm
After 450 wash programs have completed, the control will call for maintenance:
MAINTENANCE
The message appears at the start of a program, and is repeated at the beginning of each wash
program until reset (see function 217 in the EL6 Programming and Operation Manual for full
details). Before resetting the alarm, PERFORM ROUTINE MAINTENANCE AS OUTLINED
ELSEWHERE IN THIS MANUAL.
For further information regarding access functions and programming, see the EL-6 Computer Pro-
gramming and Operating Instructions manual, included with the machine or from the B&C Tech-
nologies website: www.bandctech.com.
41