Speed control panel, 2 speed control panel – B&C Technologies IS Series Commercial Ironer User Manual
Page 26
Figure 4.3: IS Series - Speed Control Panel
E
MERGENCY
S
TOP
– Press to stop machine in case of an emergency. Pressing while machine is in
operation and temperature is above 70
o
C (158
o
F) can cause damage to the machine.
G
AS
O
N
– illuminates when the Gas switch is in the on position.
4.1.2
Speed Control Panel
Refer to Figure 4.3 on page 23:
S
PEED
– indicates actual speed in feet/minute of the ironer, can also be set to display in me-
ters/minute. Contact the factory for details.
S
PEED KNOB
– Rotate clockwise for increased speed, counter-clockwise for slower speeds.
J
OG
– press and hold to jog machine forwards or backwards to remove caught goods.
D
ELIVERY
– set switch to Front to return the finished goods to the front of the machine; set to Rear
for rear return.
E
MERGENCY
S
TOP
– Press to stop machine in case of an emergency. Pressing while machine is in
operation and temperature is above 70
o
C (158
o
F) can cause damage to the machine.
P
OWER
– Indicates that the machine is ready to run
S
TART
– Press and hold for 1-2 seconds to start machine. Make sure the Emergency Stop buttons
are released.
23