B&C Technologies IS Series Commercial Ironer - Manual (Page 28)

Figure 4.4: IS Series - Proper Feeding of Small Goods
Figure 4.5: IS Series - Improper Feeding of Small Goods
11. Remove the finished goods from the output table, and fold or hang goods to prevent wrinkling.
12. To shut down the ironer at the end of the day, turn the heat switch to the OFF position, and
allow the ironer to cool down to 70
o C (158 o F) before pressing the red stop button to power down
the ironer.
For Best Finish Results:
• The pH of the goods to be ironed must be between 5.5 and 6.5.
• Do not use fabric softener! Fabric softener will be deposited onto the feeding belts and iron-
ing cylinder causing poor performance and maintenance problems.
25