B&C Technologies EL-6 Programming (SA, SB, SI, SP, HI, HP Series) - Manual (Page 12)

Cycle Programming Sequence
Cool Down
3
INC
Bal. Load
3
INC
Drain
3
INC
Cold Water
3
INC
Hot Water
3
INC
Heating
3
INC
Detergent 1
3
INC
Detergent 2
3
INC
Detergent 3
3
INC
Detergent 4
3
INC
11
To turn on a function, press Enter, to turn off a function press Reset. Press Enter to edit a numerical
value (RPM, Time, etc.). Note: Setting a function to zero DOES NOT disable that function.
Min. Level
ENTER
3
INC
Max Level
3
INC
Temp.
3
INC
WDT
3
INC
Motor
3
INC
RPM
More information on page 15
Level
3
INC
Temp.
3
INC
WDT
3
INC
Motor
3
INC
RPM
More information on page 16
Yes drains the machine.
No means the drain is closed.
Yes to turn on the cold water valve.
No means the valve is off.
Yes to turn on the hot water valve.
No means the valve is off.
Yes turns on the heat output, you
will be prompted to enter the temperature.
No means the heat output is off.
Yes to turn on chemical signal 1, and
flush cup 1 in the supply dispenser.
No means the supply is off.
Yes to turn on chemical signal 2, and
flush cup 2 in the supply dispenser, if
equipped. No means the supply is off.
Yes to turn on chemical signal 3, and
flush cup 3 in the supply dispenser, if
equipped. No means the supply is off.
Yes to turn on chemical signal 4, and
flush cup 4 in the supply dispenser, if
equipped. No means the supply is off.
continued