Hit Products Pro-Two - Manual (Page 14)

WWW.RAINPROCO.COM
2 PRO 2
WWW.RAINPROCO.COM
Position 1
Current Time: Use set 2 to set hour (this will set A.M. or P.M.), use set 3 to set minutes,
use set 4 to “zero out seconds.
Current Date: Use set 1 to change display from date to time, use set 2 to set hour (this
will set A.M. or P.M.), use set 3 to set minutes, use set 4 to “Zero out” seconds.
Position 2
Valve Run Times
Use set 1 to choose the program, use set 2 to choose the valve number, use set 3 to set
hours, use set 4 to set minutes. Input the total irrigation run time desired for each valve.
NOTE:
Program 6 valve run times can only be set in minutes and seconds. All other programs
valve run times can be set in hours and minutes. The maximum run times can be set
from 1 minute to 10 hours and 59 minutes on all programs except 6, which can be set for
a minimum of 3 seconds to a maximum of 59 minutes and 59 seconds. With the water
budget feature (position 8) these run times can be increased or decreased from 0% to
250% in 5% increments.
NOTE:
A maximum of any 2 decoders/valves (any combination) may be operated simultane-
ously.
Position 3
Pause: Use set 1 to choose the program, use set 2 or 3 to set desired time, use set 4 to
turn master valve or pump start function ON or OFF during pause function.
Definitions:
Pause: Amount of time delay between sequential valve openings in a program
Pause: Amount of time delay between sequential valve openings in a program
Master: MSTR ON will keep the master valve or pump relay ON during pause. MSTR Master: MSTR ON will keep the master valve or pump relay ON during pause. MSTR
OFF will turn master valve or pump relay OFF during pause.
Note: In order for the master valve to function, and the “MSTR ON” Feature to be activat-
ed the master valve must be activated (see Position 8 below) for that specific program.
Input Valve Run Times:
Current Date/Current Time
Pause