Pigtronix Infinity Looper - Manual (Page 12)

CHAPTER 2. ANATOMY AND FUNCTIONS 11
Setting it at around 3 o’clock gives you unity gain.
Preset
This is a rotary push button encoder that is used to select what loop
preset is in use, and to store loop audio.
The Infinity Looper allows you to store and recall up to 50 presets,
which consist of audio that you’ve either recorded on the Infinity, or
audio you’ve loaded onto the pedal from your computer using the app.
Each preset includes a Loop 1, and a Loop 2 if you’ve recorded one.
For full instructions on how to Load, Save and Copy presets, please
see the Infinity Rules preset sections, page 24.
Loop Volume 1
Sets the Loop 1 output volume.
Loop Volume 2
Sets the Loop 2 output volume.
The Loop 1 and Loop 2 Volume knobs are calibrated so that 12 o’clock
is unity gain for Loop audio. Turning either of the Loop Volume knobs
above 12 o’clock will result in Loop Audio that is actually louder than
the input signal.
However, when recording Overdubs, the Infinity keeps track of the
Maximum input level and will decrease the signal level of the Overdub
and previous recordings if the increased Loop Volume level would result
in distortion.