Pigtronix Infinity Looper - Manual (Page 41)

CHAPTER 6. MIDI 40
6.2 Time Signature
The Time signature can be changed, on a preset-by-preset basis, using
the Infinity Application. For quantization to the beat rather than to
the measure, set the measure to a single note (eg. 1/2, 1/4, 1/8,
1/16).
6.3 Commands That Sync to MIDI Clock
With MIDI Sync active, some commands initiated using the Infinity’s
footswitches will be automatically quantized to the beginning of the
next MIDI Measure.
Record and Play
Appropriate action is executed at the start of the next measure after
the switch has been pressed.
Stop
The Stop footswitch closes loops and stops loop audio at the start of
the next measure after the switch has been pressed.
Start
Starts loop audio at the start of the next measure after the switch
has been pressed. Switching between loops in Series mode will trigger