Pigtronix Infinity Looper - Manual (Page 34)

CHAPTER 4. REMOTE SWITCH FUNCTIONS 33
4.4 Rec→Overdub→Play
In response to numerous customer requests, we have implemented a
feature that allows you to go directly from recording the base layer,
straight into overdub mode. This feature is particularly good if you
have sounds (delays, reverbs etc) that will trail across the Loop’s
boundary; using it will prevent clicks and pops.
Once you have started the base layer recording, simply press the Undo
switch to close your initial loop and go straight into playback with
overdub active. Press the appropriate Loop footswitch as you nor-
mally would to close the overdub when desired and begin regular play-
back.
4.5 Instant Erase
When one or both loops are stopped, hitting Undo will trigger an
instant erase of the currently armed loop. This lets you simply leave
the unit in All mode and retain the option to clear individual loops by
pressing the Undo switch after the desired loop has been stopped.
4.6 Varispeed Remote Control Menu
For basic Varispeed functionality, see page 28.
To access the Varispeed Remote Control Menu, press and hold the
Reverse switch for 2 seconds. While in this menu a “−” is displayed
on the Multi-Segment Display. This menu remaps the functionality
of the Reverse and Undo switches to control the pitch of recorded
material. To exit this menu, press and hold the Reverse switch for 2
seconds.