Canon L250 - Manual (Page 100)

Using Group Dialling
To send a document to a group of numbers, follow these instructions.
Be sure to adjust the document feed lever before loading your document. See page 5-6
for more details.
1
Prepare the document and load it, face down, into the Automatic Document Feeder (ADF).
¶ If necessary, you can adjust the resolution and contrast. See page 5-13 for more details.
2
Enter the group (s) stored under a
one-touch speed dialling button (s) and/or
coded speed dialling code (s).
¶ The name registered under that one-touch
speed dialling button or coded speed
dialling code is displayed. If no name is
registered, GROUP DIAL will be displayed.
¶ If you make a mistake when selecting a
group, press the ( STOP) button and
start again.
¶ If you press a one-touch speed dialling
button or coded speed dialling code that
has no group (or fax number) registered
under it, the LCD displays NO TEL #.
Make sure you pressed the correct
one-touch speed dialling button or entered
the correct coded speed dialling code, and
that the group you want has been registered
correctly under that button or code.
¶ After entering the first one-touch speed
dialling button or coded speed dialling code,
you have five seconds to enter another
speed dialling button or code before the
FAX-L250 begins sending automatically. If
you have entered more than one speed
dialling button or code, the FAX-L250
waits for 10 seconds before it begins
sending.
MEMORY REF
CODED DIAL
TEL=Canon GROUP 2
TEL=Canon GROUP 1
Ex:
Ex:
Speed Dialling
4-22