Canon L250 User Manual
Page 249
TX SETTINGS
Name
Description
Settings
ECM TX
Enable/disable error correction during transmission.
ON/OFF
MID PAUSE SET
Set the length of the pause you insert into a dialling sequence.
2 seconds (1 to 15)*
AUTO REDIAL
Set whether the FAX-L250 redials if it fails to get a response
on the first attempt.
ON/OFF
REDIAL TIMES
Set the number of retries.
2 times (1 to 15)**
REDIAL INTERVAL
Set the period of time between rediallings.
2 minutes (2 to 99)***
TX ERROR RESEND
Set whether the fax redials if an error occurs while sending.
ON/OFF
RESEND TX FROM
Set which pages to resend if TX ERROR RESEND is on.
ERROR & 1ST PG/
ERROR PAGE/ALL
PAGES
ERASE FAILED TX
Set whether the fax in memory is erased if an error occurs
during sending but then it is resent successfully.
ON/OFF
AUTO START TX
ON-Scanning starts 10 seconds after the last number is
entered when sending to multiple numbers (5 seconds if only
sending to one location.)
OFF-After entering the last number, press the
(START/COPY) button, or else the FAX-L250 will return to
standby mode after 60 seconds.
ON/OFF
(Default settings are shown in bold type)
*
UK and Hong Kong: 4 seconds (04–11)
**
UK and Hong Kong: 01–03, Australia: 01–02, Ireland: 01–04, New Zealand: 01–05
***
Australia, Hong Kong, Malaysia: 01–99, New Zealand: 1 minute (01–99)
Accessing the TX SETTINGS Menu
12-9