Canon L250 - Manual (Page 172)

Using Tone Dialling on a Pulse Line
Even if you have a pulse line, the FAX-L250 enables you to use tone dialling once you have connected
to the number you are calling. This lets you take advantage of many services that require tones, such as
selecting options from telephone ″ touch-line ″ services.
1
Pick up the handset and dial the number using
the numeric buttons.
■ The unit connects using the pulses required
by your phone line.
2
Press FUNCTION, then press TONE/+ to
switch to tone dialling.
■ When the TONE/+ button is pressed, T is
displayed in the LCD.
■ Numbers entered after pressing the TONE/+
button will be dialled using tone dialling.
3
When you have finished, hang up the handset.
When registering one-touch speed dialling and coded speed dialling numbers, if you
enter the TONE/+ button after the number, you will switch to tone dialling after the
phone connection is made.
After the number (123456) is dialled, it will pause for 6 seconds (ppp) to allow the other
party to answer and then it will switch to tone (T). Now you can follow the instructions
that were recorded by the party you called.
FUNCTION
TONE/+
TEL=123456pppT*34
REDIAL/
PAUSE
REDIAL/
PAUSE
REDIAL/
PAUSE
TONE/+ Example:
Operation
Display
Special Features
7-6