Canon L250 - Manual (Page 87)

Using One-Touch Speed Dialling
Once you have registered your numbers under one-touch speed dialling buttons, you can use them to
send documents as follows:
Be sure to adjust the document feed lever before loading your document. See page 5-6
for more details.
1
Prepare the document and load it, face down, into the Automatic Document Feeder (ADF).
¶ If necessary, you can adjust the resolution and contrast. See page 5-13 for more details.
2
Press the one-touch speed dialling button
assigned to the number to which you wish to
fax.
¶ The name registered under that one-touch speed
dialling button is displayed. If no name is
registered, the number registered under that
button will be displayed.
¶ If you mistakenly press the wrong one-touch
speed dialling button, press the ( STOP)
button then press the correct button.
¶ If no fax number is assigned to the one-touch
dialling button you press, the LCD displays NO
TEL # . If this happens, make sure you pressed
the correct button and that the number you
want to dial is registered under that button.
3
Press START/COPY.
¶ If you do not press the ( START/COPY)
button within five seconds of pressing the
one-touch speed dialling button, the FAX-L250
will begin sending automatically.
¶ If an error occurs during sending, the
FAX-L250 will print an error report. If this
happens, try sending the fax again. See ″ Faxing
Problems ″ on page 10-20 for details about
errors.
DELAYED TX R
Ex:
TEL=CANON U.K.
One-Touch Speed Dialling
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
4-9