Loading recording paper – Canon L250 User Manual
Page 59
Loading Recording Paper
When the message LOAD PAPER appears in the LCD display, you need to add paper to the sheet
feeder. Here are a few tips you should follow when you load paper into the sheet feeder.
¶ Use A4-size paper.
¶ Use standard 64–90 g/m
2
weight paper.
¶ The sheet feeder holds up to 100 sheets of standard weight paper* (maximum 10 mm stack height).
¶ Let the paper run out before you refill the sheet feeder. Avoid mixing new paper with paper
remaining in the sheet feeder.
¶ Stack the paper so that the top and bottom edges and sides are straight and even before placing it in
the sheet feeder.
¶ Do not print on both sides of the paper. Doing so may cause several sheets to feed into the unit at
the same time.
■ Do not use damp, curled, wrinkled, or torn paper as these can cause paper jams or
poor print quality.
■ Highly textured or extremely smooth or shiny paper does not print well.
■ The laser printing process uses high temperatures to fuse toner to the paper. Use
paper that will not melt, vaporise, discolour, or emit dangerous fumes at
temperatures near 170°C. For example, do not use vellum paper in a laser printer.
Make sure any letterhead or coloured paper you use can withstand high
temperatures.
■ Make sure the paper is free of dust, lint, and oil stains.
■ To keep the paper from curling, do not open paper packs until you are ready to use
the paper. Store unused paper from opened packs in a cool, dry location in the
original packaging.
■ Your FAX-L250 is factory-set to use A4-size paper. If you wish to use letter- or legal
-size paper, you must change the setting from the FAX PRINTER menu. See Chapter
12,
″
The Menu System
″
for more details on changing the setting.
Do not load paper in the sheet feeder when the unit is printing.
*
75 g/m
2
paper
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2-33