Canon L250 - Manual (Page 224)

Print Quality Problems
If your print quality is not what you expect it to be, check the problems and solutions below.
Problem Possible cause Solution
Print is not clear? You may be printing on the
wrong side of the paper.
Many types of paper have a
″ correct ″ side for printing. If
your paper does, make sure
that side is facing up. If the
paper has no obvious correct
side, try turning the paper over
and printing on the other side.
The printout has vertical white
streaks?
Toner may be low or be
unevenly distributed.
Follow these steps:
1. Open the front cover and take
out the FX-3 toner cartridge.
2. Gently rock the cartridge side
to side five or six times to
evenly distribute the toner
inside.
3. Put the cartridge back into the
unit.
4. Close the front cover and try
to print again. If this does not
solve the problem, replace the
FX-3 cartridge.
Frequently Asked Questions
10-28