Canon L250 User Manual
Page 4
NOTICE FOR CONNECTION TO
TELECOMMUNICATION SYSTEMS IN THE
UNITED KINGDOM AND THE REPUBLIC OF
IRELAND
Approval Number XXXXXX (UK)
Your Canon FAX-L250 has been approved against the requirements of NTR3 for use in the UK and
complies with the requirements of 91/263 EEC. The CE mark is applied in respect of the requirements
of 72/23 EEC and 89/336 EEC. (UK)
It is intended for connection to analogue two wire public telecommunication networks.
Connect the supplied cable to this socket first, then to the telephone line.
There are two auxiliary sockets to which equipment approved for direct connection to the network may
be connected. If required, a suitable adaptor, approved under Approval Number NS/G/23/L/100005 for
connections between the fax machine and any piece of approved telecommunications apparatus, is
available from your Canon supplier. (UK)
This socket is intended for connection of a telephone, the optional handset, an answering machine
or similar device.
Voltage and current available at these sockets is determined by the network to which the line cable is
connected. They will not normally exceed the limits for TNV as described in EN60950.
Canon recommend that any additional equipment connected in the installation is connected to one of
these sockets. Do not connect additional equipment through parallel sockets elsewhere on the telephone
line.
This equipment is not intended or recommended for making calls to emergency services.
iv