C. Crane WR-2A - Manual (Page 12)


b. Manual (if your don’t want to synchronized clock time with
RDS CT)
When choosing manual setting as the clock time setting of your
radio, Radio Data System (RDS) function will both be disabled.
. Press the Menu button.
2. Rotate the Tuning control knob until a clock symbol appears
on the left side of the display, then press the Tuning control knob
to enter the setting. Rotate the Tuning control knob until ‘MANUAL’
appeared on the display, then press the Tuning control knob to
select the setting.
3. Then follow the steps described in the section of ‘Manual clock
setting’ to set the clock time manually.
Change 12/24 hour clock format
. Press the Menu button to enter the setting.
2. Rotate the Tuning control knob until ‘CLOCK 24H’ is highlighted
on the display. Press the Tuning control knob to enter the setting.
3. Rotate the Tuning control knob to choose 2/24 hour clock format.
Press the Tuning control knob to confirm the setting.