C. Crane WR-2A - Manual (Page 28)

27
Factory reset
If your radio fails to operate correctly, or some digits on the display
are missing/incomplete or you simply just want to restore to original
factory setting, carry out the following procedure.
. Press the Menu button to enter the menu setting.
2. Rotate the Tuning control knob until “FACTORY RESET” shown
on the display. Press the Tuning control knob to enter the setting.
3. Rotate the Tuning control knob to select ‘YES’, and press the
Tuning control knob to confirm the setting. A full reset will be
performed.
The station list and presets will be set to empty. Alarms will be
cancelled and timer and sleep timer settings will be set to their
default values.
RESET the radio
If your radio fails to operate correctly or some digits on the display
are missing or incomplete, please carry out the following procedure.
. Switch off the radio.
2. With the aid of a suitable implement (e.g. paper clip), press the
RESET button located in the bottom of your radio for at least 2
seconds. This will reset the microprocessor clock time and clear
all stations stored in the preset memory.