C. Crane WR-2A - Manual (Page 14)

3
D.S.T (Daylight Saving Time)
. Press the Menu button to enter the menu setting.
2. Rotate the Tuning control knob until ‘DST OFF’ is appeared on
the display. Press the Tuning control knob to enter the setting.
3. Rotate the Tuning control knob to choose ‘+1H’ (activated D.S.T.)
or ‘OFF’. Then press the Tuning control knob to confirm the setting.
Antenna setup for FM reception
The radio comes with built-in AM/FM antenna and external
antenna.
To use FM internal antenna, make sure to switch FM external/
internal antenna switch in the back of your radio to internal antenna
position (i.e. INT. FM ANTENNA). As for external antenna, you
can use to improve FM reception. Two types of antenna can be
used. You can connect the supplied FM wire antenna to the F-type
antenna terminal and adjust the wire for best reception.
You can also connect a 75 ohm coaxial cable of outdoor antenna
to the terminal. Make sure to switch external/internal antenna
switch to external position while using the supplied wire antenna
or connecting the outdoor antenna. In some of the European
countries, you may have to connect the supplied antenna terminal
adaptor to connect with the outdoor antenna.