C. Crane WR-2A - Manual (Page 21)

GB
20
b. Wake to buzzer alarm
. Before setting an alarm ensure the clock time is set. To enter the
alarm setting, press and hold buzzer alarm button ( ) until your
radio beeps.
2. The hour setting will begin to flash. Rotate the Tuning control knob
to select the required alarm hour, and press the Tuning control
knob to confirm the setting. Rotate the Tuning control knob to
select the required alarm minute, and press the Tuning control
knob to confirm the setting.
3. Then the display will show the frequency options for the alarm.
Rotate the Tuning control knob to select the desired option and
press the Tuning control knob to confirm the setting.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends
4. Rotate the Tuning control knob to select the required alarm volume
and press Tuning control knob to confirm the setting. The alarm
has now been set. Symbol for active alarm ( ) is
shown on the display.