C. Crane WR-2A - Manual (Page 23)

GB
22
Snooze
. When the alarm sounds, press any button other than the Power
button will silence the alarm for 5 minutes. “ “ will appear on
the display.
2. To adjust the silence time for the snooze timer, press the Menu
button to enter the menu setting.
3. Rotate the Tuning control knob until “SNOOZE X” shown on the
display, then press the Tuning control knob to enter the setting.
Rotate the Tuning control knob to adjust the silence time. There
are 5, 0, 5 and 20 minutes for the snooze timer. Press the
Tuning control knob to confirm the setting.
4. To cancel the snooze timer while the alarm is suspended, press
the Power button.
Sleep timer - radio auto shut off
Your radio can be set to turn off automatically after a preset time
has elapsed. The Sleep Timer setting can be adjusted between
5,30, 45, 60, 90 and 20 minutes.
. Press and hold the Standby button to enter the Sleep Timer setting.
“SLEEP XX” will show on the display. The display will cycle through
the available sleep times in the order of 60-45-30-5-20-90-60.
Release the button until the desired SleepTimer setting appears
on the display. The setting will be saved and the symbol
will be shown on the display.
2. To cancel the Sleep Timer function before the preset time has
elapsed, simply press and release the Standby button to turn the
unit off manually. The symbol will disappear on the display.