C. Crane WR-2A - Manual (Page 20)

9
3. Then the display will show the frequency options for the alarm.
Rotate the Tuning control knob to select the desired option and
press the control knob to confirm the setting.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends
4. Rotate the Tuning control knob to choose the required alarm type,
and then press the Tuning control knob to confirm the setting.
The alarm can be set to FM or AM. When radio type is selected,
the radio frequency on the display will begin to flash. Rotate the
Tuning control knob to adjust the required radio frequency or
press the corresponding preset button as desired for the radio
alarm, then press the Tuning control knob to confirm the setting.
5. Rotate the Tuning control knob to select the required alarm volume
and press Tuning control knob to confirm the setting. The alarm
has now been set. Symbol for active alarm ( ) is
shown on the display.