C. Crane WR-2A - Manual (Page 19)

GB
8
Alarm setting
There are two alarms which can each be set to wake you to AM/
FM radio or buzzer alarm. The alarms may be set while the unit
is in standby mode or while playing. When the alarm light is on, it
means the indicated alarm will active in 24 hours. Ensure that the
time is set correctly before setting the alarms.
Note:
Alarm setting can be done only when time setting is completed.
Alarm can be operated when radio is on or off. Setting via remote
control is the same.
a. Wake to radio alarm
. Before setting an alarm ensure the clock time is set. To enter the
alarm setting, press and hold radio alarm button ( ) until your
radio beeps.
2. The hour setting will begin to flash. Rotate the Tuning control knob
to select the required alarm hour, and press the Tuning control
knob to confirm the setting. Rotate the Tuning control knob to
select the required alarm minute, and press the Tuning control
knob to confirm the setting.