C. Crane WR-2A - Manual (Page 26)

25
AUX IN input level attenuation
The input level attenuation is to allow input level reduction once the
signal from external device is too strong.
Note: remote control unit is not applicable for this operation.
. Press Band button to select Aux in mode.
2. Press Menu button to enter the setting list.
3. Rotate the Tuning control knob until “ATT ON” shown on the
display. Press the Tuning control knob to enter the setting.
4. Rotate the Tuning control knob to select attenuation on or off.
If ‘ON’ is selected, display will show ATT symbol indicating the
input signal has been attenuated.
REC OUT socket
On the rear of your radio is for use with a tape recording/mini disc
or to allow connection to line input of a Hi-Fi system. The signal on
the Record out socket is unaffected by the volume control.