CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 15)

EdgeAccess Universal Chassis System
L351 10/100BASE Media Converter 3-2
LED Status Description
LNK/Rx (User Port) Off No link
Green Link Established
Green blinking Receiving activity
Amber System self-test
Off No transmission activity
Green Transmission activity
Amber Port in standby mode or system self-test
TX (User Port)
Red Transmission disabled due to LLF or port disabled
Off 10 M data rate 100
Green 100 M data rate
Off Half duplex mode FDX
Green Full duplex mode
Off No link
Green Link Established
Green blinking Receiving activity
Amber System self-test
LNK/Rx
(Extension Port)
Red Receiving Remote Fault
Off No transmission activity
Green blinking Transmission activity
Amber Port in standby mode or system self-test
Tx (Extension Port)
Red Transmission disabled due to LLF
3.4 Alarms
The L351 can generate Major and Minor Alarms.
• In the UCS 1000 and 1002, these alarms are forwarded over the backplane to the CIM and appear
on the Major (MAJ) and Minor (MIN) CIM LEDs and then are forwarded to the DMM for
monitoring and transfer to the Network Manager as traps.
• In the UCS 1001, the alarm outputs are forwarded to the chassis motherboard.
For details about the Alarm Output Configuration, Alarm Log, and Trap Configuration screens, see
Chapter 4.