CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 34)

EdgeAccess Universal Chassis System
L351 10/100BASE Media Converter 4-15
Menu Item Description
14. Lockout Craft Port Disable access to the serial port to prevent any
unauthorized access; to re-enable the craft port, run a
Telnet session
15. Inactivity Logout time (mins) Set the time, between 1 and 30 minutes, before
automatic log-out with no activity; 0 = disabled
4.5.7 User Accounts Screen
The User Accounts screen provides options to set values for parameters for specific users. To access
the User Accounts screen, see Figure 27 and follow these steps:
1. From the System Configuration menu type
7
, "Account Configuration," and press <Enter>.
USER ACCOUNTS
Account Access Access Locked
Username State From Level Description Out
admin Enabled UI/SNMPv3 Supervisor Upgrade Account No
Figure 27. User Accounts Screen
2. To add a user, type
1
, or to edit an existing user, type
3
, and press <Enter>, then type the
Username and follow the prompts on the Edit User Account screen to enter values or press
<Space> to cycle through options for these parameters:
• Account State: enabled or disabled
• Access From: UI, SNMPv3, or UI/SNMPv3
• UI indicates access through Telnet, Console, SSH, FTP, or SFTP, and requires additional
parameter setup
• SNMPv3 enhances security and requires additional parameter setup
• Access level: Supervisor, Operator, or Observer
• Description: optional; up to 17 characters
• UI Password: password that allows access through Telnet, Console, SSH, FTP, or SFTP; 8 to 15
characters
• UI Password Expires: Yes or No
• UI Password Expires in (days): 0 (never) to 365
• Allow UI Lockout of User: Yes or No; can disable access for this user after excessive failed
attempts to log in
• Allow UI Logout of User: Yes or No; can automatically log user out after excessive inactivity
• UI Logout Locked State: shows current state as Locked, Unlocked, Logged out, or Logged in