CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 39)

EdgeAccess Universal Chassis System
L351 10/100BASE Media Converter 4-20
4.9 Layer 2 Statistics
Use the Layer 2 Statistics screen to view data transfer protocol statistics on the L351. See Figure 33.
To view layer 2 statistics, follow these steps:
1. From the Main Menu, type
5
, "Layer 2 Statistics," and press <Enter>. The Layer 2 Statistics
screen appears.
2. To reset the counters, press <Ctrl-R>.
3. To view additional statisctics for the remote module, press <Tab>. At that screen, you can access
remote RMON statistics; tyep
2
and press <Enter>.
4. When you finish checking the statistics, press <Esc> to return to the Main Menu.
LAYER 2 STATISTICS
Local Local Remote Remote
User Port Ext Port Ext Port User Port
Link State UP UP UP UP
Speed/Duplex 100M/FULL 100M/FULL 100M/FULL 100M/FULL
Frames Sent 28207788 28319769 28200427 28200710
Frames Rcvd 28319769 28207788 28200711 28200426
Bytes Sent 837493720 926021313 831705864 831880780
Bytes Rcvd 926020552 837494685 831881457 831705499
Undersize (< 64) 0 0 0 0
Frames > 1518 0 0 0 0
Oversize (> 9216) 0 0 0 0
CRC Errors 0 0 0 0
Fragments 0 0 0 0
Collisions 0 0 0 0
Late Collisions 0 0 0 0
Dropped 0 0 0 0
Frames Sent Rate 7802/s 7796/s 7815/s 7802/s
Frames Rcvd Rate 7796/s 7802/s 7802/s 7815/s
Figure 34. Layer 2 Statistics Screen
4.10 Utilities
Use the Utilities screen to set the time and date, update modem, SLIP, or PPP parameters, or to run
the diagnostic PING. See Figure 35 and Table 9. Options 5 through 9 are available only when the
L351 is in a standalone enclosure. To access the Utilities screen, follow these steps:
1. From the Main Menu, type
6
, "Utilities," and press <Enter>. The Utilities menu appears.
2. To return to the Main Menu, press <Esc>.