CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 32)

EdgeAccess Universal Chassis System
L351 10/100BASE Media Converter 4-13
The Trap/Notification Destination Table screen lists information about and options to set up hosts to
receive notification of traps and alarms. To access the Trap/Notification Destination Table screen,
see Figure 25 and follow these steps:
1. From the SNMP Configuration menu type
7
, "Trap Table," and press <Enter>.
2. At the Trap/Notification Destination Table screen, type
1
to edit a host or
2
to add a host at the
Edit Notification Destination Entry screen, or type
3
to remove a host.
Note: To add or edit a host entry, follow the prompts on the notification destination entry screen.
3. To return to the SNMP Configuration menu, press <Esc>.
TRAP/NOTIFICATION DESTINATION TABLE
Managing Trap Username/ Security
Host Port Type Community Level
172.16.14.200 163 V1-Trap public N/A
172.16.100.20 162 V2c-Trap public N/A
172.16.142.1 163 V3-Trap public Auth/No Priv
Figure 25. Trap/Notification Destination Table Screen
4.5.6 Security Configuration
The Security Configuration menu provides options to set values for general parameters for passwords,
lockout, and logout. To access the Security Configuration screen, see Figure 26 and Table 7 and
follow these steps:
1. From the System Configuration menu type
6
, "Security Configuration," and press <Enter>.
2. At the Security Configuration screen, type the number for an item and press <Enter>, then press
<Space> to cycle through the options and press <Enter> to select an option.
3. To return to the System Configuration menu, press <Esc>.