CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 22)

EdgeAccess Universal Chassis System
L351 10/100BASE Media Converter 4-3
4.3.2 User Interface Organization
The user interface consists of selectable, nested screens, available in this order:
Main Menu
1. System Configuration
1. Hardware Configuration
SFP Information
2. Functional Configuration
3. Trap Configuration
4. Alarm Output Configuration
5. IP/SNMP Agent Configuration
6. Host Access Table (for standalone enclosure, only)
7. Trap/Notification Destination Table (for standalone enclosure, only)
6. Security Configuration
7. User Accounts
1. or 3. Edit User Account
8. System Information
2. Diagnostics
1. Loopback Setup
2. Remote Latency/Jitter Test
3. Link Status
4. System Alarms
5. Layer 2 Statistics
6. System Log
7. Utilities
7. PING Generation
8. Static ARP Table
9. Dynamic ARP Table
8. Software Upgrade
9. Change Password (for standalone enclosure, only)
10. Connected Sessions (for standalone enclosure, only)
This chapter describes each of these screens in detail.
4.3.3 Login Menu
The first screen is the Login Menu. If this is your initial setup and no password has been set, press
<Enter> at the prompt for the password. Otherwise, type your password and press <Enter>.