CANOGA PERKINS N525 Ethernet Termination Service Unit - Manual (Page 51)

N525 Ethernet Termination Service Unit 3-33
Setting Up User Accounts
You can set up an account for a user, whether another supervisor, operator, or observer, to
access the N525. You can also update or delete usernames or permissions. Setting certain
values for some parameters, such as SNMPv3 Authentication and Privacy Protocols, determine
or limit which values you can set for other parameters. To manage a user account, follow these
steps:
1. At the Main Menu, type [ 1 ], "System Configuration," and press <Enter>.
2. At the System Configuration Menu, type [ 4 ], "Account Configuration," and press <Enter>.
The User Accounts Menu appears.
3. To add a user, type [ a ], or to edit an existing user, type [ e ], and press <Enter>. Type the
Username . Follow the prompts on the Edit User Account Menu to enter values or select
options by pressing <Space> to cycle through available parameters.
a. Account State
Enables or Disables user access to the N525’s management functions. Options
are Enabled and Disabled.
b. Access From
Configures authorized access methods via the User Interface (UI) using Telnet,
VT-100 on the RS-232 Serial Port, SSH, FTP, and SFTP or by SNMPv3.
Options are UI, SNMPv3, or UI/SNMPv3 (both UI and SNMPv3)
c. Access Level
Assign user privilege level. Levels are Supervisor, Operator, or Observer
d. Description
Account description. This is optional and is 0 to 17 characters long.
e. UI Password
Password that allows access through Telnet, Console, SSH, FTP, or SFTP.
Passwords are 8 to 15 characters in length.
f. UI Password Expires
Configures if Passwords expire and require replacement, Yes or No.
----------------------------------EDIT USER ACCOUNT-----------------------------
Username : admin
1. Account State : Enabled
2. Access From : UI/SNMPv3
3. Access Level : Supervisor
4. Description : Default Account
5. UI Password : ***************
6. UI Password Expires : No
UI Password Expires in (days) : 0
7. Allow UI Lockout Of User : No
8. Allow UI Logout Of User : No
9. UI Login Locked State : Unlocked
10. SNMPv3 Authentication Protocol : None
11. SNMPv3 Authentication Password : N/A
SNMPv3 Authentication Key : N/A
12. SNMPv3 Privacy Protocol : None
13. SNMPv3 Privacy Password : N/A
SNMPv3 Privacy Key : N/A
Select [1-13]:
------------------------------------Messages------------------------------------