CANOGA PERKINS N525 Ethernet Termination Service Unit - Manual (Page 60)

3-42 N525 Ethernet Termination Service Unit
Changing Your Password
Whether you have supervisor, operator, or observer access, you can update your password in
order to maintain system security. You cannot change the password for any other users. To
update your password, follow these steps:
1. At the Main Menu, type [ 6] , "Utilities," and press <Enter>.
2. At the Utilities screen, type [ 3 ], "Change Password," and press <Enter>, then follow the
prompts on the screen to enter your current password, then change it and confirm your new
password.
3. To return to the Main Menu, press <Esc>.
Managing Logged In Users
At times, you may need to monitor which users are currently logged in to the N525 and, if
needed, force off specific sessions (requires supervisor access). The Manage Logged In Users
screen shows current users by session number. An asterisk (*) next to the session number
indicates your session. To access the Manage Logged In Users screen, follow these steps:
1. From the Main Menu, type [ 8 ], "Manage Logged In Users," and press <Enter>.
2. To force a session off, type the number for that session and press <Enter>.
-------------------------------CHANGE PASSWORD----------------------------------
Please enter your current password : *****
Please enter your new password : *****
Please enter your new password again : *****
------------------------------------Messages------------------------------------