CANOGA PERKINS N525 Ethernet Termination Service Unit - Manual (Page 61)

N525 Ethernet Termination Service Unit 3-43
Note: Although a user with any level of access can view this screen, you must have supervisor access to
force off a session.
3. To return to the Main Menu, press <Esc>.
Managing the Network Interface
When configuring ports, it is best to configure options in this order:
1. Set up the physical layer, such as port speeds.
2. Set up the VLAN rules, translation, and priority bits.
3. When all aspects of the link are ready, connect cables and start the network services.
Configuring Ports
Port functions are configured on the Functional Configuration Menu. This screen also displays
data speed and duplex settings for the local N525 and the remote N525, L351 or L357. If the
remote device is an L351 or L357, you can configure that device. For details, see the user
manual for the L351 or L357. The Port Information Screen displays general Port status and
menu for access Port Configuration and port Status/Performance functions.
----------------------------MANAGE LOGGED IN USERS------------------------------
Session Type Username Access Description
--------------------------------------------------------------------------------
Console AT LOGIN MENU
* 1. Network admin Supervisor Default Account
* = Current Session
ESC to exit or the number of the session to force off:
------------------------------------Messages------------------------------------