CANOGA PERKINS N525 Ethernet Termination Service Unit - Manual (Page 57)

N525 Ethernet Termination Service Unit 3-39
Trap Destination Configuration
You can configure and display the destinations for Trap messages. In addition to setting the
host address and port, you can set the security level for the notification, and then set values for
various security related parameters. To access and update the Trap Notification/Destination
Table, follow these steps:
1. From the System Configuration Menu type [ 1] , "IP/SNMP Agent Configuration," and press
<Enter>, then type [ 3] , "Trap Table," and press <Enter>. The Trap/Notification Destination
Table screen appears.
---------------------TRAP/NOTIFICATION DESTINATION TABLE------------------------
Managing Trap Username/ Security
Host Port Type Community Level
172.016.002.040 162 V1-Trap public N/A
Select [(A)dd, (D)elete, (E)dit, (M)ore]:
------------------------------------Messages------------------------------------