Leica Geosystems T100 - Manual (Page 11)

11
T105/T110-1.3.0en Introduction
Important buttons:
Confirms settings; back into
measuring mode.
Paging through menu (e.g.
within the configuration).
Selection of a setting.
The active selection is always
indicated in the left part of the
display.
Buttons
A button is a symbol in the display
which is always assigned to a
function key directly below it. Buttons
can be found mainly in the
configuration menu.
Find more and detailled
information about buttons in
the relevant sections.
AutoOff
The instrument is equipped with an
automatic switching off function.
Is activated when:
• battery low,
• no action is carried out with the
instrument for 1/3 hour (= no key
pressed; V and Hz angle deviation
£ ±3' / ±600cc).
The function AutoOff cannot
be deactivated.
Operating the Instrument